Vanadium corrosion inhibitor

Vanadium corrosion inhibitorNote: Normal supply includes magnesium concentration of 16%, 18%, 20%, subject to blending per users requirement. Test method: Ignition method, ICP-AES, GB267, GB4472, rotating viscometer method. Scope of Application . Method for Use (1) Typical consumption of the product is 0.02% 0.1% of the fuel oil, and actual consumption can be determined according to the contents of sulfur, vanadium and other harmful substances in the fuel oil. For control of vanadium corrosion, the suggested magnesium vanadium ratio is 3:1. (2) The product features excellent fluidity, it can be mixed with fuel oil at any proportion, and it can be continuously added to the fuel oil in proportion with a metering pump (or directly charged into the fuel oil tank), and through the circulating flow, it can be sufficiently mixed with the fuel oil. Precautions. This product should stay away from water. Do not charge the product in rainy weather. Once the packing is opened, the product must be charged immediately, and shall not be exposed to atmosphere for a long time. Preferably, it shall be stored in warehouses provided with ventilation and fire fighting facilities. The storage period is two years. Packing and Transportation The product is packed in iron drums, each drum weighs 240kg. Transportation service can be provided for users. Comparison with Other Product Brands Brand Nanjing jinyanxin Other product brands 1 Stability and standing storage Good stability, no deterioration for two years, deposit is less than 0.3% No deterioration for one year, sometimes the deposit is up to 1.5% 2 Filter screen plugging Rare less than once a year Rare 3 Distributor plugging and damage No plugging or damage of distributor Plugging happened 4 Turbine output drop Output drop is slow. The drop in 100hr is 4%-6% Output drop in 100hr is about 6% 5 Oil solubility Sufficiently soluble with oil Sufficiently soluble with oil 6 Scale (Ash build-up) Scale is loose, easy to be water washed, very little scale on the surface of blade during overhaul Scale is hard, more residual scale is left after water washing, hammer is used to remove scale during overhaul 7 Price Cheap Expensive